Launch Creader Professional CRP919X BT | Diagnostic Tool | Car

Applications and functionality

Below, the functions are grouped as they appear in workshop practice.

Diagnostics

Full system diagnosis on more than 98% of vehicle models on the market, via the DBSCar VII interface in the OBD port.

• Read all systems: Retrieve fault codes from every control module in the vehicle, not just engine management.
• Display live data graphically: Monitor sensor and actuator values in real time with graphical data stream display.
• Actuator testing: Command components and actuators individually to assess operation without dismantling.
• Automatic vehicle recognition: The device retrieves vehicle data from the Launch cloud using the VIN.
• Clear fault codes: Clear the memory once repairs are complete.

Maintenance and service — 31 reset functions

The reset procedures required at service or repair intervals. Which are available depends on make, model and year of manufacture.

• Engine and drivetrain: Oil and service reset, crankshaft position sensor learning, injector coding, throttle valve learning, gearbox matching, EGR adaptation, air-fuel ratio reset, stop-start system reset and engine power balance check.
• Exhaust and emissions: DPF regeneration, GPF regeneration, AdBlue reset and NOx sensor reset.
• Brakes, chassis and driver assistance: Electric parking brake reset, steering angle sensor calibration, ABS bleeding, suspension level calibration, tyre reset and adaptive cruise control reset.
• Comfort and body: Headlight matching (AFS), sunroof initialisation, seat calibration, window calibration, air conditioning learning, coolant bleeding, language change and transport mode activation or deactivation.
• Electrical and hybrid: Battery matching, high-voltage battery reading and motor angle calibration.
• Start interrupt: Anti-theft matching (IMMO) for key programming within supported models.

Coding and programming

This is where the device goes beyond reading alone.

• ECU coding: Code control modules after replacement so the vehicle accepts the new unit.
• Unlock hidden functions: Activate factory options present in the software but not enabled.
• Install programmable modules: Install a module and provision it with the correct software.

Connectivity and protocols

What the device can technically handle.

• Bluetooth via DBSCar VII: The interface stays in the OBD port; you take the tablet with you. Wired operation via USB is also possible.
• CAN FD: The faster CAN protocol used in recent models.
• DoIP: Diagnosis over Ethernet, needed for an increasing range of modern vehicles.
• FCA AutoAuth: Access to the secure gateway of Chrysler, Jeep and Dodge. A separate FCA account is required for this.
• WiFi on 2.4 and 5 GHz: For software updates and online functions.

Supported vehicle brands

The combination of make, model and year of manufacture is what matters, not make alone. Launch quotes coverage of more than 98% of vehicle models on the market for this device, from 1996 onwards. The makes below are named in the software; available systems and functions per make vary.

• European: Abarth, Alfa Romeo, Aston Martin, Audi, Bentley, BMW, Bugatti, Citroën, Dacia, Ferrari, Fiat, Ford (Europe), GAZ, Iveco, Jaguar, Lamborghini, Lancia, Land Rover, Maserati, Maybach, McLaren, Mercedes-Benz, Mercedes-Benz Sprinter, MINI, Opel, Peugeot, Porsche, Renault, Rolls-Royce, Rover, Saab, Seat, Škoda, Smart, Vauxhall, VAZ (Lada), Volkswagen, Volkswagen commercial vehicle, Volvo
• Asian: Acura, Daewoo, Daihatsu, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mahindra, Maruti Suzuki, Mazda, Mitsubishi, Nissan, Nissan GTR, Perodua, Samsung, SsangYong, Subaru, Suzuki, Tata, Toyota
• American: Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, GM, Holden, Jeep, Lincoln
• Chinese: BAIC, BJEC, Brilliance, Changan, Changhe, Chery, Foton, Gonow, Great Wall, Haima, JAC, JAC Refine, Jinbei, Joylong, King Long, Luxgen, MG, Roewe, SAIC-GM, Senoua, Weiwang, Zhongxing, Zotye

Package contents

• 1x Launch Creader Professional CRP919X BT fault code reader
• 1x Launch DBSCar VII interface
• 1x Launch 15-pin DB15 extension cable
• 1x Launch 15-pin DB15 to 16-pin OBD2 adapter
• 1x USB-A to USB-C cable
• 1x Power adapter
• 1x User manual

Optional additions and expansions

The device is complete for diagnostics. The items listed below extend its capabilities or complement your workshop equipment.

Hardware modules and accessories

Launch does not publish any connectable modules or adapter kits for the CRP919X BT; all cabling is included in the box. The Launch devices listed below complement your diagnostic work but operate independently and do not connect to the scanner.

• Launch i-TPMS: Read, programme and teach tyre pressure sensors.
• Launch BST360: Test battery, starter motor and alternator.
• Launch VSP-600: 5.5 mm inspection camera to see where you cannot reach.

Software and licences

• FCA AutoAuth account: Required for access to the secure gateway of Chrysler, Jeep and Dodge. You arrange this directly with FCA; it is not included with the device.

Licence information

• Duration: Two years of free software updates with purchase, plus remote support via TeamViewer.
• What updates add: New vehicle models and model years, expansion of existing brands, additional service and coding procedures and corrections.
• How to update: Online via WiFi, using the update function on the device.
• After expiry: The device continues to work fully for the models and functions already installed. Online functions cease and no further updates are provided.
• Extend: With the Launch CRP919X BT update licence, available separately in our webshop.
• Manufacturer warranty: Launch provides twelve months warranty against material and manufacturing defects from delivery.

Technical specifications