Launch Creader Professional CRP919X BT | Diagnostic Tool | Car

Applications and functions

Below, the work is grouped as it arrives in the workshop.

Diagnostics

Full system diagnostics on more than 98% of vehicle models on the market, via the DBSCar VII interface in the OBD port.

• Read all systems: Retrieve fault codes from every control module in the vehicle, not just engine management.
• Display live data graphically: Monitor sensor and actuator values in real time, with graphical representation of data streams.
• Actuator testing: Control individual components and actuators to assess operation without dismantling.
• Automatic vehicle recognition: The device retrieves vehicle data from the Launch cloud database using the chassis number.
• Clear fault codes: Empty the memory once repair work is complete.

Maintenance and service — 31 reset functions

The reset procedures that accompany servicing or repair work. Which are available depends on the vehicle make, model and year of manufacture.

• Engine and drivetrain: Oil and service reset, crankshaft position sensor learning, injector coding, throttle body learning, gearbox matching, EGR adaptation, air-fuel ratio reset, stop-start system reset and engine power balance check.
• Exhaust and emissions: DPF regeneration, GPF regeneration, AdBlue reset and NOx sensor reset.
• Brakes, suspension and driver assistance: Electric parking brake reset, steering angle sensor calibration, ABS bleeding, suspension level calibration, tyre reset and adaptive cruise control reset.
• Comfort and bodywork: Headlight matching (AFS), sunroof initialisation, seat calibration, window calibration, air conditioning system learning, coolant bleeding, language selection and transport mode activation or deactivation.
• Electric and hybrid: Battery matching, high-voltage battery reading and motor angle calibration.
• Immobiliser: Anti-theft matching (IMMO) for key programming within supported vehicle models.

Coding and programming

Where this diagnostic tool goes beyond simple reading.

• ECU coding: Module programming after replacement, enabling the vehicle to recognise the new unit.
• Hidden functions activation: Enabling factory options present in the software but not yet activated.
• Module installation and programming: Installing a module and configuring it with the correct software.

Connectivity and protocols

The technical standards this device supports.

• Bluetooth via DBSCar VII: The interface remains in the OBD port; take your tablet with you. Wired operation via USB is also available.
• CAN FD: The faster CAN protocol used in recent vehicle models.
• DoIP: Diagnostics over ethernet, required for an increasing number of modern vehicles.
• FCA AutoAuth: Access to the secure gateway for Chrysler, Jeep and Dodge vehicles. Requires a dedicated FCA account.
• WiFi on 2.4 and 5 GHz: For software updates and online functions.

Supported vehicle manufacturers

Coverage depends on the combination of make, model and year of manufacture, not the make alone. LAUNCH provides coverage of more than 98% of vehicle models on the market for this device, from 1996 onwards. The following manufacturers are named in the software; available systems and functions vary by manufacturer.

• European: Abarth, Alfa Romeo, Aston Martin, Audi, Bentley, BMW, Bugatti, Citroën, Dacia, Ferrari, Fiat, Ford (Europe), GAZ, Iveco, Jaguar, Lamborghini, Lancia, Land Rover, Maserati, Maybach, McLaren, Mercedes-Benz, Mercedes-Benz Sprinter, MINI, Opel, Peugeot, Porsche, Renault, Rolls-Royce, Rover, Saab, Seat, Škoda, Smart, Vauxhall, VAZ (Lada), Volkswagen, Volkswagen commercial vehicles, Volvo
• Asian: Acura, Daewoo, Daihatsu, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mahindra, Maruti Suzuki, Mazda, Mitsubishi, Nissan, Nissan GTR, Perodua, Samsung, SsangYong, Subaru, Suzuki, Tata, Toyota
• American: Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, GM, Holden, Jeep, Lincoln
• Chinese: BAIC, BJEC, Brilliance, Changan, Changhe, Chery, Foton, Gonow, Great Wall, Haima, JAC, JAC Refine, Jinbei, Joylong, King Long, Luxgen, MG, Roewe, SAIC-GM, Senoua, Weiwang, Zhongxing, Zotye

Package contents

• 1x Launch Creader Professional CRP919X BT diagnostic scanner
• 1x Launch DBSCar VII interface
• 1x Launch 15-pin DB15 extension cable
• 1x Launch 15-pin DB15 to 16-pin OBD2 adapter
• 1x USB-A to USB-C cable
• 1x Power adapter
• 1x User manual

Optional additions and expansions

The device is complete for diagnostics. The items below extend its capabilities or complement your workshop setup.

Hardware modules and accessories

LAUNCH does not publish connectable modules or adapter kits for the CRP919X BT; all cabling is included in the box. The following Launch devices supplement your diagnostic work but operate independently and are not connected to the unit.

• Launch i-TPMS: Read, programme and teach-in tyre pressure sensors.
• Launch BST360: Test battery, starter motor and alternator.
• Launch VSP-600: 5.5 mm inspection camera to see where you cannot reach.

Software and licences

• FCA AutoAuth account: Required for access to the secure gateway of Chrysler, Jeep and Dodge. You arrange this directly with FCA; it is not included with the device.

Licence information

• Duration: Two years of free software updates upon purchase, plus remote assistance via TeamViewer.
• What updates include: New vehicle models and model years, expansion of existing brands, additional service and coding procedures and corrections.
• How to update: Online via WiFi, using the update function on the device.
• After expiry: The device continues to work fully for the models and functions already installed. Online functions cease and no further updates are provided.
• Renewal: With the Launch CRP919X BT update licence, available separately in our webshop.
• Manufacturer warranty: LAUNCH provides twelve months' warranty against material and manufacturing defects from delivery.

Technical specifications