Universal Openport 2.0 OBD2 - USB Interface Cable

The Openport 2.0 is a high-performance and universally applicable J2534 Pass-Thru device. It has become the global standard within the tuning and diagnostic community, especially for Subaru and Mitsubishi vehicles. This interface is not just a scanner; it is a robust bridge between your laptop and the Engine Control Unit (ECU) of your vehicle, designed to analyze, adjust, and fully reprogram (flash) your engine's performance.

Unlike many other interfaces, the Openport 2.0 is built with a powerful 32-bit ARM processor and supports the ability to store datalogs directly on a microSD card, without the need for a laptop. The open-source nature of the platform and broad J2534 compatibility make it an extremely versatile tool. The device is used for performance tuning and as a Pass-Thru interface for official diagnostic software, taking functionality far beyond a standard OBD2 tool.

Application and functionality:

• ECU tuning & reflashing: Read and write ECU software to optimize engine parameters such as fuel injection, ignition, and turbo pressure.
• Advanced datalogging: Record live engine data via laptop or standalone on a microSD card.
• J2534 Pass-Thru diagnostics: Use dealer diagnostic software from various car brands via a single interface.
• Read fault codes: Read and clear standard and brand-specific DTCs.
• Live data analysis: Monitor dozens of real-time ECU parameters for in-depth diagnostics.

Compatible vehicles:

The Openport 2.0 is ideally suited for:

• Subaru: Impreza WRX, STI, Forester, Liberty, etc. (from approx. 2001)
• Mitsubishi: Lancer EVO 5–10, Colt, etc.

Thanks to J2534 support, the interface is also usable with dealer diagnostic software from, among others:

• Jaguar / Land Rover
• Toyota / Lexus
• Volkswagen / Audi
• GM, Honda, Volvo and more

Note: Functionality depends on the software used and the user's technical knowledge.

Supported protocols:

• CAN 2.0 (ISO 15765)
• K-Line (ISO9141 / ISO14230 / dual K-line)
• J1850 PWM / VPW
• J2534 Pass-Thru
• MUT (Mitsubishi), SSM (Subaru)

Supported operating systems:

• Windows XP, Vista, 7, 8, 10, 11
• macOS
• Linux

Compatible software:

• EcuFlash & RomRaider: Open-source tuning tools for Subaru and Mitsubishi, with full read/write and logging capabilities.
• TIS Techstream (Toyota/Lexus): For access to ABS, airbag, BCM, key programming, actuator control, etc.
• JLR SDD (Jaguar/Land Rover): Supports symptom-driven diagnostics, service procedures and ECU programming.
• VCDS-Lite (Volkswagen/Audi): Basic diagnostics, live data and fault code reading for VAG vehicles (limited functionality).
• Other J2534 applications: Suitable for GM, Honda, Volvo, etc. provided the correct software is available.

Note: Software and licenses are not included – user is responsible for installation.

Package Contents:

• 1x Openport 2.0 OBD2 – USB interface cable
• 1x USB cable

Technical specifications: