We handle warranty cases ourselves, quickly and without involving the manufacturer. Thanks to our own parts inventory and technical expertise, we can usually assist you immediately. Only in exceptional cases do we still send the product to the supplier.
2 years warranty on all products
All our products come with a 2-year factory warranty. This ensures you long-lasting quality and service.
Easy returns
You can easily request your return through your account. We will send you the return label by email. Return shipping costs are your responsibility.
Professional customer service
Our experts are ready to help you quickly and professionally, both online and in our physical store. Questions? Feel free to contact us!
The OBDSTAR ECU Master with configuration A is an ECU programmer for passenger cars and electric vehicles. You read, clone and edit the engine management (ECM), the transmission (TCM), the body control modules (BCM) and the BMS and VCU modules of electric vehicles. OBDSTAR lists, among others, VW SIMOS, ME17 and EDC17, the Mercedes FBS3/FBS4 transmissions, BMW 8HP GEN3 and Ford MG1/MD1 GEN2.
It is a PC-controlled ECU programmer: the software runs on a Windows PC (Windows 10 or later), and the device supplies power and handles communication with the controller. You work via OBD, bench, boot, JTAG or BDM; for JTAG and BDM the C4-10 adapter is included. Which modules you can reach is determined by the configuration enabled on the serial number. Other configurations can be added later on the same device.
ADVANTAGES
✔Five working methods — OBD, bench, boot, JTAG and BDM. If one route does not work, there is often another.
✔Also electric — BMS and VCU modules, including from the Volkswagen Group, Geely and SAIC.
Mercedes FBS3/FBS4 transmissions — VIN writing, virgin and personalisation on the bench.
✔Expand later — Configuration B, C or D can be added to the same device.
POINTS TO NOTE
✕No motorcycles or commercial vehicles — Configurations B and C are required for these.
✕No airbag reset — Airbag, battery monitoring and steering angle sensor are in configuration D.
✕PC required — The software runs on a Windows PC (Windows 10 or later); this is not included.
✕No diagnostics or keys — ECU work only. For key programming there is the KeyMaster G3.
Applications and functionalities
Configuration A is intended for ECU specialists, chip tuners and workshops that clone, repair or reset to virgin controllers of passenger cars and electric vehicles. Below is what the device does.
Configuration A functions
Cloning: Transfer the data of a faulty controller to a replacement.
CheckSum: Recalculate the checksum after a modification.
IMMO data: Convert and decrypt immobiliser data.
IMMO on/off: Enable or disable the start block in the controller.
VIN: Read and write the chassis number.
Mileage: Calibrate the stored mileage in the controller.
Virgin: Restore a used controller to unused state.
Coolant sensor: Calibrate the temperature sensor in the controller.
Runtime: Calibrate the recorded operating time of the ECU.
Working methods
OBD: Via the diagnostic port, without removing the controller.
BENCH: The removed controller on the workbench, via the BENCH-C V1 cable.
BOOT: Start the controller in boot mode via a connection on the board.
JTAG: Direct access to the processor, via the C4-10 adapter.
BDM: The second debug interface, also via the C4-10 adapter.
How to use it
Installing software: Download the ECU Master software from OBDSTAR and install it on a Windows PC.
Registering: Register the device so that the configuration is enabled on your serial number.
Connecting: Connect the device to the PC and the charger, and connect the controller via OBD, BENCH-C V1 or C4-10.
Making a back-up: Find the controller by make or type, read the data and save a back-up.
Editing: Carry out the edit and write the data back.
Special functions and capabilities
OBDSTAR names the following controllers for this configuration:
Mercedes-Benz: FBS3/FBS4 transmissions: VIN via bench, virgin and personalisation.
Transmissions: AISIN, BMW 8HP GEN3 and JLR 8HP/9HP.
Ford: MG1/MD1 GEN2, also the CAN FD variants, via OBD or bench.
Volkswagen Group: SIMOS, ME17 and EDC17; for EV also Bosch VC1 and VCU8.x.
Hyundai: KEFICO SBW (shift-by-wire).
Magneti Marelli: The 11 series.
Fiat, Alfa Romeo and Ferrari: MB91F526-BSI.
Delphi: The Chinese MT series.
Supported vehicle brands
What matters is the controller in the vehicle, not the brand alone. OBDSTAR divides coverage into separate lists per module group. A brand in the ECM list does not have to appear in the transmission list, so check the operation you need.
Engine management (ECM)
More than 135 brands, including agricultural and off-road machinery.
Good to know: Always read out and save the original contents of a control unit before writing to it. A failed write operation cannot be reversed without a backup. Have the serial number of your device to hand when ordering: the configuration is enabled on it.
Update licence (renewal after the free period)
The renewal price may vary slightly. Already own the device? We will ask for the serial number after your order.
Technical specifications
General
The manufacturer of the programmer. A well-known brand often makes updates and support easier to find.Brand
OBDSTAR
Whether the device only programmes control units, also handles keys and immobilisers, or is a PC adapter.Type of programmer
ECU programmer
Which set or configuration you receive. A larger set has more functions or adapters unlocked.Configuration
Configuration A
Which vehicle types the programmer supports. Useful if you also work on motorcycles or agricultural machinery.Vehicle types
Passenger car
Electric vehicle
The car brands named in the description. The device may support more brands; coverage varies by model and year.Supported brands
How the programmer connects to the control unit: via the OBD connector, on the bench, or directly on the circuit board.Working methods
OBD
Bench
Boot
BDM
JTAG
Which control units you can read and programme with it, such as the engine or transmission control unit.Types of control units
Engine control unit (ECM)
Transmission control unit
Body control modules
Battery management (BMS)
Features
Transferring the contents of a faulty control unit to a replacement. This means the new unit does not need to be learned in at the dealer.Clone control unit
Yes
Reading the chassis number and writing it to a replacement control unit so that it matches the vehicle.Read and write VIN
Yes
Matching the mileage in a control unit to the actual reading, for example after replacing an odometer.Calibrate mileage
Yes
Returning a used control unit to as-new condition so it can be fitted in another vehicle.Reset to factory status
Yes
Recalculating the checksum after a change, so the control unit accepts the modified data.Correct checksum
Yes
Switching the immobiliser (IMMO) in the control unit on or off, for example to test a used unit.Switch immobiliser on or off
Yes
Reading and decrypting immobiliser data so you can pair keys or control units.Decrypt IMMO data
Yes
Hardware
The software the device runs on, or which system your PC needs if it operates via a computer.Operating system
Windows 10 or newer
Which cable is used to connect the programmer to the PC.Connection to computer
USB-A naar USB-B
Dimensions and weight
The length, width and height of the device, showing how much space it takes up.Dimensions
176 x 115 x 31.7 mm
The weight of the package including everything supplied. A heavier set usually includes more adapters.Shipping weight
1.75 kg
The temperature range within which the device operates reliably. Important in a cold or warm workshop.Operating temperature
-10 to 55 °C
Power supply
Adapter 14 V / 60 W
JTAG and BDM
Via the C4-10 adapter
PC connection
USB (type B)
Operating voltage
DC 14 V / 24 V
Other specifications
Type
PC-controlled ECU programmer
Weight
Approx. 0.7 kg
Updates
12 months free after registration
Reviews
5.0★★★★★1 review
5 ★1
4 ★0
3 ★0
2 ★0
1 ★0
★★★★★KamelVerified buyer
Fast delivery and correct.
Snel levering en correct.
Recommended products
Free 1 year license + TeamViewer support with purchas