OBDSTAR IScan Vespa | Diagnostic Tool | Moped/Motorcycle

Diagnostic functions

The OBDSTAR IScan Vespa offers full diagnostic functions for reading and analyzing electronic systems on Vespa vehicles. The following features are available:

• Read fault codes: Reading stored and current fault codes from all available control units on the vehicle.
• Clear fault codes: Clearing fault codes after repair or inspection.
• Live data streams: Real-time display of sensor values and parameters in text, waveform, or gauge view.
• Data stream recording and playback: Recording live data during driving or testing to analyze intermittent faults afterward.
• Actuator test: Activating actuators and components to verify operation without disassembly.
• Coding and settings: Performing coding and configurations on control units and modules.
• Automatic VIN recognition: Automatically identifying the vehicle based on the VIN number.
• Automatic scanning: Complete system scan checking all available modules for fault codes.
• First fault guidance: Support for initial diagnosis with technical bulletins and help data.

Key and EEPROM functions

The IScan Vespa supports key programming for Vespa vehicles as part of the brand-specific functionality.

• Key programming: Teaching new or replacement keys to the immobilizer system of Vespa vehicles.

Service and maintenance functions

The diagnostic tool supports multiple service and maintenance functions for Vespa vehicles. Available functions may vary by model and year.

Engine and drivetrain

• Self-learning parameters reset: Resetting self-learning values of the engine control unit after repair or replacement of components.
• Throttle valve position reset: Reinitializing the throttle valve position after maintenance or cleaning.
• Throttle valve maximum position learning: Learning the maximum throttle valve position for the engine control unit.
• Throttle valve minimum position learning: Learning the minimum throttle valve position for correct idle operation.
• Pre-positioning reset: Resetting the pre-positioning of components in the drivetrain.
• Throttle sensor pulse control: Configuring the pulse control of the throttle sensor.
• Throttle sensor pulse reset: Resetting the pulse parameters of the throttle sensor.
• Throttle self-learning procedure: Self-learning procedure for the throttle to ensure correct throttle response.
• Electronic carburetor synchronization: Synchronizing the electronic carburetor for stable mixture formation.
• Synchronization reset: Resetting synchronization values in the fuel system.

Brake and stability systems

• ABS brake system bleeding: Bleeding the ABS hydraulic system after brake maintenance.
• Reset front brake intervention counter: Resetting the counter for brake interventions on the front wheel.
• Reset rear brake intervention counter: Resetting the counter for brake interventions on the rear wheel.

Electrical and safety systems

• BMS switch operation: Controlling the switch of the battery management system.
• Vehicle stop deactivation: Deactivating the vehicle stop function for maintenance or testing.

Other service and maintenance functions

• Service reset: Resetting the maintenance indicator after service performed.
• Vehicle settings reset: Restoring vehicle settings to factory defaults.
• Odometer writing: Writing the odometer reading to the instrument panel after replacement.
• Actuators total reset: Fully resetting all actuator parameters.
• Reset log minimum values: Clearing logged minimum values in the system.
• Reset log maximum values: Clearing logged maximum values in the system.

Special functions and capabilities

In addition to standard diagnostics, the IScan Vespa offers additional functions that enable targeted diagnosis and workshop support.

• First fault guidance: Assistance in diagnosing faults using technical bulletins and help data.
• Data stream displays: Displaying live data as text, waveform, or instrument view for visual fault analysis.
• ECU settings and coding: Configuring and coding the engine control unit.
• Module programming: Programming control modules within the vehicle system.
• Instrument coding: Coding the instrument panel after replacement or modification.
• TPMS functionality: Support for tire pressure monitoring systems if present on the vehicle.
• CO adjustment: Adjusting CO values for emission control.
• A/F value reset: Resetting air-fuel ratio parameters.
• Idle speed adjustment: Adjusting the engine's idle speed.
• ABS control unit setup: Configuring the ABS control unit after replacement.
• EOL mode: End-of-line functionality for vehicle configuration.
• Transmission memory reset: Clearing memory in the transmission control unit.
• Computer memory clearing: Clearing temporarily stored data in the vehicle computer.
• One-click remote assistance: Request for remote technical support by OBDSTAR technicians.

Supported vehicle brands

The IScan Vespa is specifically developed for one vehicle brand within the European segment.

• European: Vespa

Optional additions and expansions

The IScan Vespa can be expanded with additional hardware for specific diagnostic applications on Vespa vehicles.

Hardware modules and accessories

• M003A Multifunction Jumper Cable: Cable for directly connecting ECUs or specific components outside the vehicle for diagnostic purposes.
• M047 Vespa Diagnostic Adapter: Adapter for connecting the diagnostic device to the specific diagnostic connector of Vespa vehicles.

License information

The OBDSTAR IScan Vespa comes with a license linked to the device’s serial number. The license controls access to software updates and brand-specific Vespa functionality.

• License period: The license is valid for 1 year from device activation.
• Software updates: Updates add support for new Vespa models and model years, expand diagnostic and service functions, and fix any software bugs.
• Extended functions: Key programming, module programming, ECU coding, and automatic VIN recognition require an active license for full availability.
• After license expiration: The device will continue to operate with the last installed software version, but new updates and expansions are only available after renewing the license.

Package Contents

• 1x OBDSTAR IScan Vespa diagnostic device
• 1x 12V2A charger
• 1x M001A main cable
• 1x M002 power cable
• 1x N004 Vespa adapter
• 1x N041 OBD adapter

Technical specifications