We handle warranty cases ourselves, quickly and without involving the manufacturer. Thanks to our own parts inventory and technical expertise, we can usually assist you immediately. Only in exceptional cases do we still send the product to the supplier.
All our products come with a 2-year factory warranty. This ensures you long-lasting quality and service.
You can easily request your return through your account. We will send you the return label by email. Return shipping costs are your responsibility.
Our experts are ready to help you quickly and professionally, both online and in our physical store. Questions? Feel free to contact us!
The Universal V1.5 | ELM327 Interface Cable (USB) is a wired diagnostic cable designed for reading standard vehicle data via the OBD2 port. The cable is equipped with a standard 16-pin OBD2 connector on the vehicle side and a USB Type-A connector for connection to an external PC or laptop. The interface acts as a bridge between the vehicle's internal data network and diagnostic software on a computer. The primary use of this interface is to perform basic diagnostics, including reading and clearing OBD2 fault codes (DTCs) in the engine control unit (ECU) and monitoring current sensor data.
The cable works by translating signals from various vehicle networks into serial communication via USB. Because this cable uses the V1.5 chipset, the device supports a wide range of communication protocols, including CAN (ISO 15765-4), KWP2000 (ISO 14230-4), ISO 9141-2, and the older SAE J1850 PWM and VPW protocols. During use, the diagnostic software sends standard PID requests (Parameter IDs) via the USB port to the ELM327 chip, which converts these requests into the correct vehicle protocol and sends them to the ECU. The returned vehicle data is then translated by the interface into readable values for the software, resulting in the display of live parameters such as engine speed, coolant temperature, and lambda sensor values.
This interface cable is aimed at fundamental engine management diagnostics via standard OBD2 protocols. Available functions depend on the software used on the connected system.
The hardware of the ELM327 V1.5 is designed for broad compatibility within established EOBD/OBD2 standards.
This universal interface cable is not brand-specific but designed for compatibility with all vehicles that comply with legal OBD2/EOBD standards.
General compatibility:
The cable provides only the physical connection and protocol translation and fully depends on third-party diagnostic software to visualize data and send commands.
Compatible software:
Operating systems:
| Specification | Description |
|---|---|
| Product brand | Universal |
| Product model | ELM327 V1.5 (USB) |
| Hardware version | V1.5 |
| Vehicle connection | 16-pin OBD2 (J1962) |
| System connection | USB Type-A |
| Data interface | Serial port emulation (COM port) |
| Supported protocols | ISO 15765-4 (CAN), ISO 14230-4 (KWP2000), ISO 9141-2, SAE J1850 VPW, SAE J1850 PWM |
| Power supply voltage | 12V (directly powered via the vehicle's OBD2 port) |
Great OBD2 interface! Used for Tiger 900, direct connection and service interval reset!
Prima OBD2 interface! Gebruikt voor Tiger 900, direct verbinding en service interval gereset!
Works fine
Works fine
Very satisfied, I was able to use this cable to adjust parameters in a Dacia Duster II.
Zeer tevreden, heb deze kabel kunnen gebruiken om parameters aan te passen in een Dacia Duster II.
The Universal V1.5 | ELM327 Interface Cable (USB) is a wired diagnostic cable designed for reading standard vehicle data via the OBD2 port. The cable is equipped with a standard 16-pin OBD2 connector on the vehicle side and a USB Type-A connector for connection to an external PC or laptop. The interface acts as a bridge between the vehicle's internal data network and diagnostic software on a computer. The primary use of this interface is to perform basic diagnostics, including reading and clearing OBD2 fault codes (DTCs) in the engine control unit (ECU) and monitoring current sensor data.
The cable works by translating signals from various vehicle networks into serial communication via USB. Because this cable uses the V1.5 chipset, the device supports a wide range of communication protocols, including CAN (ISO 15765-4), KWP2000 (ISO 14230-4), ISO 9141-2, and the older SAE J1850 PWM and VPW protocols. During use, the diagnostic software sends standard PID requests (Parameter IDs) via the USB port to the ELM327 chip, which converts these requests into the correct vehicle protocol and sends them to the ECU. The returned vehicle data is then translated by the interface into readable values for the software, resulting in the display of live parameters such as engine speed, coolant temperature, and lambda sensor values.
This interface cable is aimed at fundamental engine management diagnostics via standard OBD2 protocols. Available functions depend on the software used on the connected system.
The hardware of the ELM327 V1.5 is designed for broad compatibility within established EOBD/OBD2 standards.
This universal interface cable is not brand-specific but designed for compatibility with all vehicles that comply with legal OBD2/EOBD standards.
General compatibility:
The cable provides only the physical connection and protocol translation and fully depends on third-party diagnostic software to visualize data and send commands.
Compatible software:
Operating systems:
| Specification | Description |
|---|---|
| Product brand | Universal |
| Product model | ELM327 V1.5 (USB) |
| Hardware version | V1.5 |
| Vehicle connection | 16-pin OBD2 (J1962) |
| System connection | USB Type-A |
| Data interface | Serial port emulation (COM port) |
| Supported protocols | ISO 15765-4 (CAN), ISO 14230-4 (KWP2000), ISO 9141-2, SAE J1850 VPW, SAE J1850 PWM |
| Power supply voltage | 12V (directly powered via the vehicle's OBD2 port) |