Mercedes (Sprinter) - (Euro 6) | DTC remover | Delivery van
Warranty directly via AsTools
Warranty directly via AsTools
We handle warranty cases ourselves, quickly and without involving the manufacturer. Thanks to our own parts inventory and technical expertise, we can usually assist you immediately. Only in exceptional cases do we still send the product to the supplier.
2 years warranty on all products
2 years warranty on all products
All our products come with a 2-year factory warranty. This ensures you long-lasting quality and service.
Easy returns
Easy returns
You can easily request your return through your account. We will send you the return label by email. Return shipping costs are your responsibility.
Professional customer service
Professional customer service
Our experts are ready to help you quickly and professionally, both online and in our physical store. Questions? Feel free to contact us!
This DTC remover for Mercedes Sprinter Euro 6 from CAN-BUS EMULATOR clears stored fault codes from the control units of a Mercedes-Benz Sprinter with a Euro 6 engine. You plug it into the diagnostic port, and within a short time it sends a clearing command to, among others, the engine control unit, the AdBlue system, the braking system and the vehicle computer. No laptop, software or licence is required.
It is designed to quickly clear the fault memory after a repair or fault, for example on the road or at a location where no diagnostic device is at hand. It only clears stored (non-active) fault codes. As long as the cause is still present, an active fault will return. The module does not detect any fault and does not change anything in the software of the control units; a diagnostic device is still needed to find the cause.
ADVANTAGES
POINTS TO NOTE
Applications and functions
The DTC remover is intended for workshops, mobile technicians and fleet managers with Mercedes-Benz Sprinters who want to quickly clear the fault memory after a repair or temporary fault.
What it does
- Clears fault codes: Clears stored fault codes in the supported control units.
- After repair: Removes old messages once the cause has been resolved.
- Repeat: If a message returns, repeat the procedure or find the cause with a diagnostic device.
What it does not do
- No reading: Does not display fault codes, live data or reports.
- No adjustments: Does not change software or settings in the control units.
- No active faults: A fault that is still present will be reported again by the control unit.
How to use it
- Ignition on: Switch the ignition on, but do not start the engine.
- Plug in: Insert the module into the diagnostic port and wait 30 seconds.
- Ignition off: Switch the ignition off and remove the module.
- Wait: Wait 30 seconds and start the engine.
- Check: If a message is still present, repeat the steps or find the cause with a diagnostic device.
Supported vehicles and systems
This version is for the Mercedes-Benz Sprinter with a Euro 6 engine.
Vehicle makes
- Mercedes-Benz Sprinter: Euro 6
Supported systems
- Engine: Engine control unit
- AdBlue: Exhaust gas aftertreatment
- Brakes: Braking system
- Vehicle computer: Central control unit
- Transmission: Automatic transmission
- Suspension: Suspension
Package contents
- 1x DTC remover for Mercedes Sprinter Euro 6
Technical specifications
| Specification | Description |
|---|---|
| Brand | CAN-BUS EMULATOR |
| Type | DTC eraser (fault code eraser) |
| Suitable for | Sprinter (Euro 6) |
| Emission standard | Euro 6 |
| Connection | Vehicle diagnostic port (OBD) |
| Power supply | Via the diagnostic connector |
| Operation | Automatic after plugging in, no laptop or software required |
| Erasing time | Approx. 30 seconds |
| Supported systems | Engine, AdBlue, Brakes, Vehicle computer, Gearbox, Suspension |
| Article number | Mercedes (Sprinter) (Euro 6) DTC remover |