MAN (Euro 6) | DTC remover | Truck
Warranty directly via AsTools
Warranty directly via AsTools
We handle warranty cases ourselves, quickly and without involving the manufacturer. Thanks to our own parts inventory and technical expertise, we can usually assist you immediately. Only in exceptional cases do we still send the product to the supplier.
2 years warranty on all products
2 years warranty on all products
All our products come with a 2-year factory warranty. This ensures you long-lasting quality and service.
Easy returns
Easy returns
You can easily request your return through your account. We will send you the return label by email. Return shipping costs are your responsibility.
Professional customer service
Professional customer service
Our experts are ready to help you quickly and professionally, both online and in our physical store. Questions? Feel free to contact us!
This DTC eraser for MAN Euro 6 from CAN-BUS EMULATOR clears stored fault codes from the control units of a MAN TGX, TGS or TGL. You plug it into the diagnostic port and, within a short time, it sends an erase command to, among others, the engine control unit (EDC17CV41 and earlier EDC7/MS6.1), the AdBlue system (TEMIC), the braking system (EBS) and the vehicle computer (FFR/PTM). No laptop, software or licence is required.
It is designed to quickly clear the fault memory after a repair or fault, for example on the road or at a location where no diagnostic device is at hand. It only clears stored (non-active) fault codes. As long as the cause is still present, an active fault will return. The module does not detect any fault and does not change anything in the software of the control units; a diagnostic device is still needed to find the cause.
ADVANTAGES
POINTS TO NOTE
Applications and functions
The DTC eraser is intended for workshops, mobile mechanics and fleet managers with MAN trucks that need to quickly clear the fault memory after a repair or temporary fault.
What it does
- Clears fault codes: Clears stored fault codes in the supported control units.
- After repair: Removes old messages once the cause has been resolved.
- Repeat: If a message returns, repeat the procedure or find the cause with a diagnostic device.
What it does not do
- No reading: Does not display fault codes, live data or reports.
- No adjustments: Does not change software or settings in the control units.
- No active faults: A fault that is still present will be reported again by the control unit.
How to use it
- Ignition on: Switch the ignition on, but do not start the engine.
- Plug in: Insert the module into the diagnostic port and wait 30 seconds.
- Ignition off: Switch the ignition off and remove the module.
- Wait: Wait 30 seconds and start the engine.
- Check: If a message is still present, repeat the steps or find the cause with a diagnostic device.
Supported vehicles and systems
According to CAN-BUS EMULATOR, this version works on Euro 6 and Euro 6.2, and in general on MAN trucks from 2004 onwards.
Vehicle makes
- MAN TGX: Euro 6 and Euro 6.2
- MAN TGS: Euro 6 and Euro 6.2
- MAN TGL: Euro 6 and Euro 6.2
- Other: MAN trucks from 2004 onwards in general
Supported systems
- MS6.1, EDC7, EDC7C32, EDC17CV41: Engine control unit
- TEMIC: AdBlue system
- EBS 2.2, EBS 5: Braking system
- FFR, PTM: Vehicle computer
- AS Tronic: Automated gearbox
Package contents
- 1x DTC eraser for MAN Euro 6
Technical specifications
| Specification | Description |
|---|---|
| Brand | CAN-BUS EMULATOR |
| Type | DTC eraser (fault code eraser) |
| Suitable for | TGX, TGS, TGL |
| Emission standard | Euro 6 / Euro 6.2 |
| Connection | Vehicle diagnostic port (OBD) |
| Power supply | Via the diagnostic connector |
| Operation | Automatic after plugging in, no laptop or software required |
| Erasing time | Approx. 30 seconds |
| Supported systems | MS6.1, EDC7, EDC7C32, EDC17CV41, TEMIC, EBS 2.2, EBS 5, FFR, PTM, AS Tronic |
| Article number | MAN DTC Eraser Euro 6 |