Order before 16:00 on business days? Shipped the same day!

Fast & reliable shipping throughout Europe

Expert customer service with professional advice

Mega Sale: Discounts up to 75%! While supplies last!

View Offers
Discover similar products: OBDSTAR, Vehicle OBD Extension Cables & Adapters
OBDSTAR  |  SKU: TCM-024 / 7.53.2

OBDSTAR (TCM-024) | ZF (8HP45-TC277) 16-pins TCM – 15-pins DB15 Adapter Cable | Passenger Car

€29,95 incl.
€24,75 excl.

Warranty directly via AsTools

We handle warranty cases ourselves, quickly and without involving the manufacturer. Thanks to our own parts inventory and technical expertise, we can usually assist you immediately. Only in exceptional cases do we still send the product to the supplier.

2 years warranty on all products

All our products come with a 2-year factory warranty. This ensures you long-lasting quality and service.

Easy returns

You can easily request your return through your account. We will send you the return label by email. Return shipping costs are your responsibility.

Professional customer service

Our experts are ready to help you quickly and professionally, both online and in our physical store. Questions? Feel free to contact us!

The OBDSTAR TCM-024 adapter cable is designed for a direct connection to the 16-pin TCM connector (Transmission Control Module) of ZF 8HP45-90 and 8HP45 (GEN3 TC277) automatic transmissions. This adapter links the specific round transmission connector to the 15-pin DB15 port of an OBDSTAR diagnostic device or programmer. This creates a reliable physical interface for bench applications on the transmission mechatronics of various passenger cars, commercial vehicles, and sports cars.

Through the DB15 interface, the cable ensures stable transmission of CAN bus communication and the necessary power signals between the transmission module and the diagnostic hardware. The pin configuration is precisely matched to the requirements of the ZF mechatronics, guaranteeing safe communication with the TC277 chip. This allows modules to be read and programmed outside the vehicle, excluding incorrect voltage levels or signal loss.

ADVANTAGES

✔ Enables direct communication with ZF 8HP45-90 and GEN3 TC277 transmission modules via a bench setup.
✔ Equipped with the specific 16-pin round TCM connector for seamless connection to the mechatronics.
✔ Supports lossless transmission of CAN bus signals for safe reading and writing of data.
✔ Fully matched to the 15-pin DB15 port of compatible programming hardware.

ATTENTION POINTS

✕ Only compatible with OBDSTAR readers or programmers; does not work with equipment from other manufacturers.
✕ Requires disassembly of the TCM module or direct physical access to the transmission connector.
✕ Exclusively designed for the ZF 8HP and TC277 series, not compatible with older 6HP systems.

Applications and functionalities

This adapter cable supports various transmission-related programming and diagnostic functions on the bench in combination with the appropriate OBDSTAR hardware.

  • Module cloning: Reading and writing EEPROM and flash data for exchanging or replacing defective transmission modules.
  • TCM reset: Resetting the adaptive values and virginizing the mechatronics for reuse in another vehicle.
  • Bench Diagnosis: Read and clear fault codes directly on the transmission unit outside the vehicle.
  • System Calibration: Establish communication for calibrating and safely learning the ZF transmission after mechanical repair.

Compatible vehicles and applications

The OBDSTAR TCM-024 Adapter Cable is widely applicable for vehicles equipped with ZF 8HP45, 8HP90, and GEN3 TC277 transmissions. The list below shows the supported brands and common models with these gearboxes.

Alfa Romeo:

  • Giulia (952): (2015 - present)
  • Stelvio (949): (2016 - present)

Alpina:

  • B3 / D3 (F30/G20 generations): (2013 - present)

Aston Martin:

  • DB11: (2016 - present)
  • Vantage: (2018 - present)

Audi:

  • A8 (D4/D5): (2010 - present)
  • Q7 (4M): (2015 - present)

Bentley:

  • Continental GT: (2011 - present)

BMW:

  • 3-Series (F30/G20): (2011 - present)
  • 5-Series (F10/G30): (2010 - present)

Chrysler:

  • 300 (LD): (2012 - present)

Dodge:

  • Charger: (2015 - present)
  • Challenger: (2015 - present)

Great Wall:

  • Pao / Cannon: (2019 - present)

Iveco:

  • Daily (Hi-Matic): (2015 - present)

Jaguar:

  • XE / XF: (2012 - present)
  • F-Type: (2013 - present)

Jeep:

  • Grand Cherokee (WK2 / WL): (2014 - present)

Lamborghini:

  • Urus: (2018 - present)

Land Rover:

  • Range Rover: (2012 - present)
  • Discovery: (2014 - present)

MAN:

  • TGE: (2017 - present)

Maserati:

  • Ghibli: (2013 - present)
  • Levante: (2016 - present)

Porsche:

  • Cayenne: (2010 - present)
  • Panamera: (2016 - present)

Rolls-Royce:

  • Phantom: (2012 - present)
  • Ghost: (2014 - present)

VinFast:

  • Lux A2.0: (2019 - present)
  • Lux SA2.0: (2019 - present)

Volkswagen:

  • Amarok: (2012 - present)
  • Touareg: (2010 - present)
💡
Good to know: Check before connecting to the bench that the pins of the mechatronics connector are clean. A clean connection with the Adapter prevents communication errors and voltage drops during writing files to the chip.

Package Contents

  • 1x OBDSTAR (TCM-024) | ZF (8HP45-TC277) 16-pin TCM – 15-pin DB15 Adapter Cable | Passenger Car