OBDSTAR IScan Piaggio Multi | Diagnostic Tool | Moped/Motorcycle

Diagnostic functions

The IScan Piaggio Multi offers full diagnostic functions for engine management and other vehicle systems on two-wheelers within the Piaggio group. The availability of functions may vary by model and year of manufacture.

• Reading fault codes: Reading active and stored fault codes from the connected control units for targeted diagnosis.
• Clearing fault codes: Removing fault codes after completed repair or inspection.
• Live data: Real-time reading of sensor values and parameters, displayed as text, waveform, or instrument diagram.
• Actuator test: Activating components such as relays, pumps, and valves to check operation without disassembly.
• ECU settings: Adjusting control parameters within the control unit for configuration and calibration.
• ECU coding: Coding control units after replacement or specific work.
• ECU programming: Programming control units with the associated vehicle-specific data.
• Automatic VIN recognition: Automatically detecting the vehicle identification number for quick vehicle selection.
• Guided fault diagnosis: Step-by-step help data and technical bulletins for systematic troubleshooting.
• Data recording and playback: Capturing live data for later analysis of sensor and component faults.

Key and EEPROM functions

The IScan Piaggio Multi supports key programming for motorcycles within the Piaggio group. The optional P001 IMMO kit is required to perform these functions.

• Motorcycle key programming: Adding and programming keys for Aprilia, Derbi, Gilera, Moto Guzzi, Piaggio, and Vespa via the IMMO kit.
• Immobilizer functions: Work on the immobilizer system in combination with the P001 IMMO kit and associated adapters.

Service and maintenance functions

The diagnostic tool supports various service and maintenance functions for motorcycles and scooters. Available functions may vary by vehicle brand, model, and year.

Engine and throttle system

• Throttle body adaptation: Teaching the throttle body after cleaning or replacement for correct regulation.
• Throttle position sensor reset: Resetting the throttle valve position sensor for accurate control.
• Throttle handle sensor reset: Resetting the throttle handle sensor to the starting position.
• Throttle handle learning: Teaching the control unit the end positions of the throttle handle.
• Pre-positioning reset: Resetting pre-positioning values of actuators or valves.
• Resetting self-learning parameters: Clearing learned adaptation values so the control unit can relearn.
• Electronic synchronization: Synchronizing electronically controlled components with the control unit.

Brake and stability systems

• Bleeding the ABS Brake system: Procedure for bleeding the ABS hydraulic system after maintenance on the Brake system.
• Reset front brake intervention counter: Reset the counter that records the number of ABS interventions on the front brake.
• Reset rear brake intervention counter: Reset the counter that records the number of ABS interventions on the rear brake.

Body and comfort systems

• Reset service interval: Reset the maintenance interval after a service is performed.
• Adjust odometer: Adjust the mileage when replacing the odometer unit.
• Reset vehicle settings: Restore vehicle settings to factory defaults.

Electrical and safety systems

• Close BMS switch: Activate the battery management system switch.
• Open BMS switch: Deactivate the battery management system switch.
• Deactivate vehicle stop: Remove an active vehicle stop condition.

Other service and maintenance functions

• Total actuators reset: Reset all actuators within a system to the default position.
• Reset minimum values log: Clear recorded minimum values in the log.
• Reset maximum values log: Clear recorded maximum values in the log.

Special functions and capabilities

In addition to diagnosis and service, the IScan Piaggio Multi offers some specific functions that support workshop workflows.

• Guided fault diagnosis: Step-by-step guidance with help data, technical bulletins, and information about the diagnostic connector.
• Live data display modes: Live data can be shown as text, waveform graph, or instrument diagram for various analysis purposes.
• Data recording and playback: Save and review real-time data to locate intermittent faults.
• Automatic VIN recognition: Quick vehicle selection through automatic reading of the vehicle identification number.
• One-click software update: Update the software via a WiFi connection with a single action.
• Remote assistance: Receive remote technical support from OBDSTAR technicians via an internet connection.
• Expandable memory: Support for a microSD card up to 32 GB for additional storage capacity.

Supported vehicle brands

The diagnostic tool is fully tailored to the Piaggio group and supports the following brands for both diagnosis and key programming.

• European: Aprilia, Derbi, Gilera, Moto Guzzi, Piaggio, Vespa

Optional additions and expansions

The IScan Piaggio Multi can be expanded with optional hardware for brand-specific connections and additional functions such as key programming.

Hardware modules and accessories

• M003A Multi-Functional Jumper: Multifunctional jumper cable for direct connection to ECU pins during specific diagnostic or programming procedures.
• M047 Diagnostic Adapter (Vespa): Adapter cable for connection between the Diagnostic Tool and the specific diagnostic port of Vespa motorcycles.
• M048 Diagnostic Adapter (Aprilia): Adapter cable for connection to the specific diagnostic port on Aprilia motorcycles.
• P001 IMMO kit: Complete set including programmer and Adapters for performing key programming and related immobilizer functions.

License information

The IScan Piaggio Multi comes with a software license that provides access to diagnostic and programming functions for motorcycles of the Piaggio group. The license controls access to software updates and advanced features.

• License period: A 1-year license is included upon purchase for access to diagnostic functions and software updates.
• Software updates: Updates add support for newer models within the Piaggio group, expand existing diagnostic functions, and include improvements and bug fixes.
• Extended functions: Features such as one-click software updates, remote assistance, and access to the latest brand-specific modules require an active license.
• After license expiration: The device continues to function with the last installed software version, but new updates and expansions are blocked until the license is renewed.

Package Contents

• 1x OBDSTAR IScan Piaggio Multi Diagnostic Tool
• 1x 12V2A charger
• 1x M001A main cable
• 1x M002 power cable with crocodile clips
• 1x N004 Adapter (Aprilia/Ducati/Honda/KTM/Piaggio/Vespa/Yamaha)
• 1x N041 OBD Adapter

Technical specifications