OBDSTAR IScan Aprilia | Diagnostic Tool | Moped/Motorcycle

Diagnostic functions

The OBDSTAR iScan Aprilia offers diagnostic functions that provide access to the control modules of Aprilia two-wheelers. This allows reading and clearing fault codes, analyzing live data, and controlling components.

• Read fault codes: Reading active and stored fault codes from connected control modules.
• Clear fault codes: Removing fault codes after repair or inspection.
• Live data: Displaying real-time sensor values in text, graph, or gauge form for analyzing current measurements.
• Record and playback data: Capturing and reviewing live data to detect intermittent faults.
• Actuator tests: Activating actuators to check their operation without disassembly.
• Settings and coding: Adjusting parameters and performing coding on control modules.
• Automatic scanning: Quick system check reading all available control modules.
• Automatic VIN recognition: Identifying the vehicle based on the VIN number.
• Guided fault diagnosis: Step-by-step assistance in locating faulty sensors and components using technical bulletins and help data.

Key and EEPROM functions

The iScan Aprilia supports key-related functions for Aprilia two-wheelers. The optional P001 IMMO kit is required for full IMMO functionality.

• Program keys: Teaching new or spare keys to the immobilizer system.
• Reset keys: Erasing existing key data from the control module.
• EEPROM reset: Resetting EEPROM data within supported control modules.
• Enter user code: Entering the security code to access protected functions.
• Recover user code: Recovering or retrieving the user code in case of loss or replacement.
• Reset odometer key errors: Resetting the counter that records failed authentication attempts.

Service and maintenance functions

The OBDSTAR iScan Aprilia supports various service and maintenance functions for Aprilia two-wheelers. Available functions may vary by model and year.

Engine and fuel system

• ECU reset: Resetting the engine control module to default values.
• Self-learning parameters reset: Clearing learned adaptation values of the ECU.
• Throttle valve self-learning procedure: Teaching the basic position of the throttle valve to the ECU.
• Throttle position sensor reset: Resetting the throttle position sensor.
• Throttle position sensor zero point setting: Setting the zero point of the throttle position sensor.
• Throttle valve closed position learning: Learning the fully closed position of the throttle valve.
• Throttle valve maximum position learning: Learning the maximum throttle valve position.
• Throttle valve minimum position learning: Learning the minimum throttle valve position.
• Throttle valve reference point setting: Recording the reference point of the throttle valve.
• Throttle grip self-learning procedure: Teaching the throttle grip position to the control system.
• Stepper motor adaptation: Adaptation of the stepper motor of the fuel system.
• Idle mixture adjustment: Adjusting the fuel mixture at idle speed.
• CO adjustment: Adjusting the CO content in the exhaust gases.
• Long-term fuel control adaptation: Adjusting the long-term fuel control.
• Adaptive knock control values reset: Resetting learned values of the knock control.
• Cylinder pressure balance: Checking and balancing the cylinder pressure.

Exhaust and emission systems

• Exhaust gas valve zero position setting: Setting the zero position of the exhaust gas valve.
• Exhaust butterfly valve self-learning procedure: Self-learning procedure for the exhaust butterfly valve.
• Exhaust valve zero position calibration: Calibrating the zero position of the exhaust valve.
• Exhaust valve self-learning procedure: Self-learning procedure for the exhaust valve.

Transmission and drive

• Gearbox shift path calibration: Calibrating the shift path of the gearbox.
• Belt replacement registration: Registering a replaced drive belt in the system.
• Preload motor setting: Setting the preload motor.
• Pre-positioning reset: Resetting the pre-positioning values.

Brake and tire systems

• Front wheel TPMS sensor learning: Teaching the tire pressure sensor of the front wheel.
• Rear wheel TPMS sensor learning: Teaching the tire pressure sensor of the rear wheel.
• Front wheel brake intervention counter reset: Resetting the counter for front wheel brake interventions.
• Rear wheel brake intervention counter reset: Resetting the counter for rear wheel brake interventions.
• Rotation sensor reset: Resetting the rotation sensor.
• Phon wheel reset: Resetting the phon wheel (gear for speed measurement).

Other service and maintenance functions

• Service reset: Resetting the maintenance interval after completed service.
• Vehicle settings reset: Restoring vehicle settings to factory defaults.
• Coding reset: Resetting coding data.
• Potentiometer reset: Resetting potentiometers.
• Equivalent kilometers reset: Resetting the equivalent odometer.
• Initialization: Initializing control modules after replacement or repair.

Special functions and capabilities

In addition to diagnosis and maintenance, the iScan Aprilia offers special functions that support advanced tasks.

• ECU programming: Programming the engine control module.
• ECU coding: Coding control modules after replacement or adjustment.
• Instrument coding: Coding the instrument panel.
• EOL mode (End Of Line): Performing final inspection and configuration procedures.
• Transmission memory clearing: Clearing the memory of the transmission control.
• Computer memory clearing: Clearing the memory of the control computer.
• A/F value reset: Resetting the air/fuel ratio.
• Idle speed adjustment: Adjusting the idle speed.
• Maintenance light reset: Turning off the maintenance indicator light after service.
• Remote support: Remote access by OBDSTAR technicians for technical assistance during diagnosis.

Supported vehicle brands

The iScan Aprilia is specifically developed for one vehicle brand within the motorcycle and scooter segment.

• European: Aprilia

Optional additions and expansions

The functionality of the iScan Aprilia can be expanded with optional hardware accessories and Adapters.

Hardware modules and accessories

• P001 immobilizer (IMMO) kit: Kit for programming keys and performing immobilizer functions.
• M003A multi-functional jumper cable: Jumper cable for various pin-out connections.
• M004 diagnostic Adapter: Adapter cable for motorcycle brands such as Aprilia, Ducati, Honda, KTM, Piaggio, Vespa, and Yamaha.
• M048 Aprilia diagnostic Adapter: Specific adapter cable for Aprilia motorcycles.

License information

The iScan Aprilia comes with a software license that provides access to diagnostic and programming functions for Aprilia two-wheelers. Updates are released by OBDSTAR via wifi.

• License period: 1 year of free software updates included with the purchase of the device.
• Software updates: Updates add support for new Aprilia models, new control modules, additional features, and include bug fixes and stability improvements.
• Extended functions: An active license is required to access software updates and new features; functions such as key programming also require the optional P001 IMMO kit.
• After license expiration: The device continues to function with the last installed software version; new updates can only be installed after renewing the license.

Package Contents

• 1x OBDSTAR iScan Aprilia Diagnostic Tool
• 1x 12V2A charger
• 1x M001A main cable
• 1x M002 power cable
• 1x N004 Aprilia Adapter
• 1x N041 OBD Adapter

Technical specifications