Mercedes (Euro 6) | DTC remover | Truck
Warranty directly via AsTools
Warranty directly via AsTools
We handle warranty cases ourselves, quickly and without involving the manufacturer. Thanks to our own parts inventory and technical expertise, we can usually assist you immediately. Only in exceptional cases do we still send the product to the supplier.
2 years warranty on all products
2 years warranty on all products
All our products come with a 2-year factory warranty. This ensures you long-lasting quality and service.
Easy returns
Easy returns
You can easily request your return through your account. We will send you the return label by email. Return shipping costs are your responsibility.
Professional customer service
Professional customer service
Our experts are ready to help you quickly and professionally, both online and in our physical store. Questions? Feel free to contact us!
The Can-Bus Emulator Mercedes Euro 6 DTC Eraser is a specialized DTC remover designed for Trucks. This diagnostic tool is developed for mechanics, breakdown services, and drivers to quickly clear stored diagnostic trouble codes (DTCs) via the standard OBD port. The device is specifically tailored to the architecture of heavy commercial vehicles equipped with Euro 6 engines. By cleaning the fault memory, the module offers an immediate solution to remove historical errors and temporarily take the vehicle out of limp mode, allowing a trip to a safe location or workshop to be completed under control without unnecessary power restrictions.
When the module is connected, it immediately initiates communication via the CAN-bus network with the relevant control units, such as engine management, the vehicle ECU (GM), and the AdBlue system. The processor sends an encoded erase function command to clear stored (historical) fault codes from memory, including common NOx sensor messages. It is technically important to emphasize that permanent fault codes are not resolved by this; an active hardware fault in, for example, emission components must be physically repaired. Only after the ECU detects during the next drive cycle that sensor values are back within tolerances will the permanent status be definitively removed from the system.
ADVANTAGES
KEY POINTS
Applications and functionalities
This tool is aimed at resolving software blocks during transport or as a quick reset tool in the workshop prior to further diagnostic work.
- Clearing DTCs: Mass clearing of historical and temporary fault codes from the memory of connected vehicle systems via an automated process.
- Resetting emission systems: Specifically clearing stored faults related to the NOx sensors and the SCR system (including communication with the ACM2.1 module).
- Emergency mode release: Deactivating software-based speed and torque reductions (limp mode) caused by historical fault codes, to temporarily restore the mobility of the Truck.
Supported vehicles and systems
The software architecture of this module is specifically written for heavy commercial vehicles from Mercedes-Benz.
Vehicle brands:
- Mercedes-Benz Actros: (MP IV, focused on Euro 6 engine configurations)
- Mercedes-Benz Antos: (Euro 6 engine configurations)
- Mercedes-Benz Atego: (Euro 6 engine configurations)
Supported systems:
- Engine ECU (Engine management and injection control)
- AdBlue / SCR system (Including NOx sensors and ACM2.1 emission control)
- Vehicle ECU (Gateway Module / general vehicle electronics)
- Brake systems (EBS and ABS control)
- Automatic transmission (Transmission control unit)
- Tachograph, Retarder and Suspension (Chassis and safety systems)
Package Contents
- 1x Mercedes (Euro 6) | DTC remover | Truck
