BMW K+DCAN OBD2 - USB Switch Interface Cable White

The white BMW K+DCAN interface cable is an essential diagnostic and coding tool for BMW owners. The 2-in-1 switch makes it easy to switch between older (1998-2007) K-Line models and newer (2007-2018) K+DCAN models.

This interface cable allows you to view live data from all control units, even while driving, and to program new computers. View compensation values for common-rail fuel injectors, set key memory, and check the engine's diagnostic data. Read and clear fault codes, upload/download flash data, read measured values, and check input/output. Calibration and coding of ECU variables, CAN-bus mode emulation, and FRM reset at high mileage (>50) are also possible.

You must ensure proper installation yourself!

Features:

• Program new computers

• View live data from all control units, even while driving

• View common-rail injector compensation

• Set key memory

• Check engine diagnostic data

• Read and clear fault codes

• Upload and download flash data

• Read measured values

• Check input/output

• Calibrate and code ECU variables

• CAN-bus mode emulation

• Reset FRM at high mileage (>50)

Suitable for the following vehicle makes and models:

Interface cable switch (right):

• BMW 1 Series - E81, E87 (after 3/2007)

• BMW 3 Series - E90, E91, E92, E93 (after 3/2007)

• BMW 5 Series - E60, E61 (after 3/2007)

• BMW X3 - E83 (after 9/2006)

• BMW X5 - E53, E70 (after 3/2007)

• MINI Z3 - R50, R52, R53, R55, R56, R57, R58, R60, R61

Interface cable switch (left):

• BMW 1 Series - E81 (up to 03/2007)

• BMW 3 Series - E36, E46, E90, E91, E92, E93 (up to 03/2007)

• BMW 5 Series - E39, E60, E61 (up to 03/2007)

• BMW 6 Series - E63, E64 (up to 03/2007)

• BMW 7 Series - E38, E65, E66, E67, E68 (up to 03/2007)

• BMW X3 - E83 (up to 03/2007)

• BMW X5 - E53, E70 (up to 03/2007)

• BMW Z Series - E36, E37, E38, E85, E86 (up to 03/2007)

• BMW motorcycles

Compatible with the following programs:

• INPA: For extensive diagnostics and reading fault codes.

• EDIABAS: A technical basis for BMW diagnosis and communication.

• NCS Expert: For coding and programming BMWs.

• NCS Dummy: Simplifies the use of NCS Expert.

• SSS Progman: For updating software modules and vehicle options.

• Tool32: For advanced ECU functions and diagnostic tests.

• WinKFP: For flashing ECUs with updated software.

Additionally, the cable is compatible with many other BMW programs, allowing you to fully utilize the potential of your BMW vehicle.

Package contents:

• BMW K+DCAN OBD2 - USB Switch Interface Cable (White)

• CD-ROM